Team Cowie Drag Skyline 2007 Spec

[COLOR="white"]SPECIFICATION[/COLOR]

[COLOR="white"]ENGINE[/COLOR]
[COLOR="white"]Nissan Skyline GT-R R32,3L OS Giken motor, uprated Tomei oil pump, RB Motorsport big sump and Trust remote oil filter kit, RB Motorsport modified
oil feed to cylinder head, Mocal oil cooler,RB Motorsport cylinder head Oil Scavenge Pump system,Turbo Dynamics 1250 bhp GT spec single turbo,Trust racing wastegate and short dump pipe, Trust RSPL-R 170mm-thick cored
intercooler, RB Motorsport custom 4" hard pipe kit, Trust racing dump valve,R.B Motorsport 115mm throttle body, R.B Motorsport ultra-large plenum, HKS 300+ degree Step 3 PRO L camshafts, OS Giken 3L adjustable cam pulleys,Tomei kevlar-reinforced timing belt, Tomei valve springs and retainers, RB Motorsport-spec modified cylinder head with 1.5mm Oversize IN /EX valves,
Trust 1.2mm head gasket, RB Motorsport  fuel rail, 1600cc injectors, New 3x Bosch 044 external fuel pump system,uprated fuel pressure regulator,12-litre alloy fuel cell, Trust OS 3L exhaust manifold, Meercat modified 5" exhaust system, Trust uprated radiator,
RB Motorsport modified cylinder head cooling system, Autronic SM4 engine management unit, Autronic 500R High power Direct Fire ignition CDI unit 605 Volts, large Autronic boost solenoid, six Bosch single-plug coils Power Output expect 1200 true bhp, but will never be dyno'd to find out.[/COLOR]

[COLOR="white"]TRANSMISSION[/COLOR]
[COLOR="white"]All OS Giken unless otherwise stated: four-plate clutch assembly, OS-88 six-speed sequential-shift gearbox with custom-made RB Motorsport-spec gear-cluster, OS Giken Super Lock limited-slip diffs front and rear, Nissan transfer box, Nissan drive shafts all through, RB Motorsport Flat Shift gear-lever kit,Torqline 5.9 kg carbon propshaft.[/COLOR]

[COLOR="white"]BRAKES[/COLOR]
[COLOR="white"]DBA Skyline GT-R discs and calipers all round[/COLOR]

[COLOR="white"]SUSPENSION[/COLOR]
[COLOR="white"]HKS Hypermax Drag system all round,
Everything adjustable, RB Motorsport-reinforced rear beam assembly, uprated bushes throughout[/COLOR]

[COLOR="white"]WHEELS/TYRES[/COLOR]
[COLOR="white"]Mickey Thompson ET drag radials all round, 26x10.5x16in fitted to standard Skyline R32 GT-R 8x16in five-spoke rims[/COLOR]

[COLOR="white"]EXTERIOR MODS[/COLOR]
[COLOR="white"]Radical lightening programme, glass fibre replica doors with plexiglass windows, VeilSide Drag boot lid with integral low-line rear spoiler,Simpson Parachute[/COLOR]

[COLOR="white"]INTERIOR MODS[/COLOR]
[COLOR="white"]Totally stripped-out interior, Bride racing driver's seat, standard R32 GT-R steering wheel, custom instrument layout with oversized boost gauge and gearchange light, safety cage,RB Motorsport mechanical 4wd controller[/COLOR]

It'll go a bit then................. ;D..........lol

awsome car Keith think this one has to be my favorite skyline along with Micks super lemon

good luck this year hope u can keep improving on that 8.8 who knows may see 7s

Jim

3L OS Giken engine build.

throttle body

fudgin hell Keith that will swallow small children



Jim

awsome car Keith think this one has to be my favorite skyline along with Micks super lemon

good luck this year hope u can keep improving on that 8.8 who knows may see 7s  

Jim

Hi Jim

I would love yo do a high 7 but i dont think that will happen soon.

All i want is a 8.54 a that will make me the fastest in the world on street tyres.

Keith

well good luck to ya mate

and ill try come down on the 16th or 17th to see you run

Jim

fudgin hell Keith that will swallow small children  

Jim

It is a bit on the big side but it works well.

Keith

if it works use it, i really need to do more work on my CRX lol

what is that tiny turbo off? is that a standard GTR turbo?

Jim

5" exhaust system



4" dowpipe



6" back box

if it works use it, i really need to do more work on my CRX lol

what is that tiny turbo off? is that a standard GTR turbo?

Jim

Hi Jim

Not sure what it is off its not for a skyline.

the inlet on my turbo is 6" with a 4" exhaust housing

Keith